Filter
Top Products
12-8
Function Commands
VERSus
Example This example defines a function that subtracts waveform memory 1 from channel 1.
10 OUTPUT 707;":FUNCTION1:SUBTRACT CHANNEL1,WMEMORY1"
VERSus
Command :FUNCtion<N>:VERSus <operand>,<operand>
This command defines a function for an X-versus-Y display. The first operand defines the Y
axis and the second defines the X axis. The Y-axis range and offset are initially equal to that of
the first operand and can be adjusted with the RANGe and OFFSet commands in this sub-
system.
Restrictions Available only in oscilloscope and TDR/TDT modes.
<operand> {CHANnel<N> | FUNCtion<N> | RESPonse<N> | WMEMory<N> | <float_value>}
Example This example defines function 1 as an X-versus-Y display. Channel 1 is the X axis and wave-
form memory 2 is the Y axis.
10 OUTPUT 707;":FUNCTION1:VERSUS WMEMORY2,CHANNEL1"
VERTical
Command :FUNCtion<N>:VERTical {AUTO | MANual}
This command sets the vertical scaling mode of the specified function to either AUTO or
MANual. The VERTical command also includes a subsystem consisting of the commands
POSition and RANGe.
Query :FUNCtion<N>:VERTical?
The query returns the current vertical scaling mode of the specified function.
Returned Format [:FUNCtion<N>:VERTical] {AUTO | MANual}<NL>
Example 10 OUTPUT 707;":FUNCTION1:VERTICAL?"
VERTical:OFFSet
Command :FUNCtion<N>:VERTical:OFFSet <offset_value>
This command sets the voltage represented at center screen for the selected function. This
automatically changes the mode from auto to manual. <offset_value> is the offset value and
is limited only to being within the vertical range that can be represented by the function data.
Query :FUNCtion<N>:VERTical:OFFset?
The query returns the current offset value of the selected function.
NOTE This query returns the current offset value of the specified function only when the respective function display is
ON.
Returned Format [:FUNCtion<N>:VERTical:OFFset] <offset_value><NL>
Example 10 OUTPUT 707;":FUNCTION2:DISPLAY ON"
30 OUTPUT 707;":FUNCTION2:VERTICAL:OFFSET?"