Filter
Top Products
18-29
Measure Commands
RESults?
<result list> A list of the measurement results, as in Table 18-2, separated with commas.
Example This example places the current results of the measurements in the string variable.
10 DIM Result$[200] !Dimension variable
20 OUTPUT 707;":MEASURE:RESULTS?"
30 ENTER 707;Result$
Table 18-2. Results Values
Sendvalid OFF Sendvalid ON
Limit test OFF current result current result
validity
minimum
a
a. This value is not returned in Jitter Mode. Instead, the measurement result 9.99999E+37 is returned.
minimum
a
maximum
a
maximum
a
mean
a
mean
a
standard deviation
a
standard deviation
a
n-samples
a
n-samples
a
Limit test ON current result current result
validity
minimum
a
minimum
a
maximum
a
maximum
a
mean
a
mean
a
standard deviation
a
standard deviation
a
n-samples
a
n-samples
a
limit failures limit failures
limit total tests limit total tests
limit status limit status