Filter
Top Products
7-6
Calibration Commands
MODule:OCONversion?
MODule:OCONversion?
Query :CALibrate:MODule:OCONversion? {LMODule | RMODule | CHANnel<N>},{WAVelength 1 | WAVelength 2 |
USER}
This query returns the optical conversion (responsivity) of the specified channel at the spec-
ified wavelength. Wavelength 1 and Wavelength 2 are for factory-calibrated wavelengths.
USER is the result of a user optical calibration. If LMOD or RMOD is specified for a dual opti-
cal module, the optical conversion of channel 1 (for LMOD) or channel 3 (for RMOD) will be
returned. <N> is an integer, from 1 to 4.
Returned Format [:CALibrate:MODule:OCONversion] <value><NL>
MODule:OPOWer
Command :CALibrate:MODule:OPOWer <optical_power_value>
This command sets the optical power level for an optical channel module calibration. This
command should only be used for modules with an optical channel.
Example 10 OUTPUT 707;":CALIBRATE:MODULE:OPOWER 500E–6"
MODule:OPTical
Command :CALibrate:MODule:OPTical {CHANnel<N>}
This command initiates an O/E calibration on the selected channel. The selected channel
must be an optical channel. <N> is an integer, from 1 to 4.
Example 10 DIM Prompt $[64]
20 OUTPUT 707;":CALIBRATE:MODULE:OPTICAL CHAN1"
30 OUTPUT 707;":CALIBRATE:SDONE?"
40 ENTER 707;Prompt$ <Disconnect optical source form channel 1>
50 OUTPUT 707;":CALIBRATE:CONTINUE"
60 OUTPUT 707;":CALIBRATE:SDONE?"
70 ENTER 707;Prompt$ <Enter wavelength and power of optical source>
80 OUTPUT 707;":CALIBRATE:MODULE:OWAVELENGTH 1340E–9"
90 OUTPUT 707;":CALIBRATE:MODULE:OPOWER 500E–6"
100 OUTPUT 707;":CALIBRATE:CONTINUE"
110 OUTPUT 707;":CALIBRATE:SDONE?"
120 ENTER 707;Prompt$ <Connect optical source to channel 1>
130 OUTPUT 707;":CALIBRATE:CONTINUE"
140 OUTPUT 707;":CALIBRATE:SDONE?"
150 ENTER 707;Prompt$ <Done>
160 END
MODule:OWAVelength
Command :CALibrate:MODule:OWAVelength <wavelength>
This command sets the optical wavelength for an optical channel calibration. This command
should only be used for modules with an optical channel.
Example 10 OUTPUT 707;":CALIBRATE:MODULE:OWAVELENGTH 1340E–9"