Filter
Top Products
Groundsmaster 5900/5910 Page 3 -- 25 Diesel Engine
Removal (Fig. 21)
1. Park machine on a level surface, lower cutting
decks, stop engine, engage parking brake and remove
key from the ignition switch.
2. Raise and support hood to allow access to engine.
3. Clean breather components before removal to pre-
vent contaminant entry into breather system.
4. Remove breather components as necessary using
Figure 21 as a guide.
Installation (Fig. 21)
1. Install removed breather components using Figure
21 as a guide. If removed, make sure that check valve
(item 16) is installed with black side toward the engine
oil pan (Fig. 22).
2. Lower and secure hood.
Figure 22
1. Base (gray) 2. Cover (black)
1
2
TOWARD ENGINE
FROM BREATHER
Diesel
Engine