Filter
Top Products
Groundsmaster 5900/5910 Page 5 -- 25 Electrical System
4. PIN SETTINGS (Fig. 41)
Use of a PIN allows the ability to password protect
access to Info Center SETTINGS screens.
If a PIN is desired for Info Center access, use the
navigation buttons to change the PIN ENTRY to ON.
To enter PIN, use navigation buttons to accept PIN
CHANGE. Use the Info Center Displaybuttons toen-
ter the desired four (4) digit PIN and accept the PIN.
NOTE: IfPIN use is chosen(PINENTRYON), make
sure to record PIN so future Info Center Display ac-
cess is available. If PIN reset is necessary (e.g. PIN
has been forgotten), contact your Toro Distributor.
5. SPEED LIMITS (Fig. 42)
Use the SPEED LIMITS settings to adjust the maxi-
mum ground speed for the machine. Speed adjust-
ments are available for forward and reverse in both
high and low speed range settings.
After using the navigation buttons to choose the
speed to be adjusted, the current speed limit will be
identified with an indicator mark. Press the Info Cen-
ter button under the+or -- to change thespeed limits.
Exit the screen after ground speed adjustments are
complete.
6. RESTORE DEFAULTS (Fig. 43)
Use the RESTORE DEFAULTS settings to accept
the Info Center defaults.
Figure 41
Figure 42
Figure 43
Electrical
System