Filter
Top Products
Groundsmaster 5900/5910 Page 3 -- 3 Diesel Engine
Stopping the Engine
IMPORTANT: Before stopping the engine after
mowing or full load operation, allow the engine to
run atlow idle speed for five (5) minutes. This will al-
low the turbocharger and internal engine compo-
nents to adequately cool down. Failure to allow this
cool down period may lead to premature turbochar-
ger and engine failure.
Fuel Injection System
The engine fuel injection system operates at high pres-
sures during engine operation. Do not loosen any fuel
system components, fittings or hoses while the engine
is running.
Keep body and hands away from leaks in engine fuel in-
jection lines. Use cardboard or paper to find high pres-
sure fuel leaks if they may exist. Leaking fuel under
pressure can penetrate skin and cause injury.
Diesel
Engine