Filter
Top Products
Groundsmaster 5900/5910Hydraulic System Page 4 -- 106
3. Remove caps and plugs from fittings and hoses.
Properly connect hydraulic lines to manifold (see Hy-
draulic Hose and Tube Installation in the General Infor-
mation section of this chapter).
4. Connect wire harness connector to the solenoid
valve.
5. Make sure hydraulic tankis full. Add correct oilifnec-
essary.
1. LH PTO manifold
2. O--ring
3. Quick fitting
4. Dust cap
5. O--ring
6. Hydraulic 90
o
fitting
7. O--ring
8. Hydraulic 90
o
fitting
9. O--ring
10. O--ring
11. O--ring
12. Hydraulic 90
o
fitting
13. O--ring
14. Straight fitting
Figure 80
6
10
8
2
3
1
11
9
7
12
13
4
5
5
7
14
20 ft--lb
(27 N--m)
75 ft--lb
(101 N--m)
UP
LH PTO MANIFOLD