Filter
Top Products
Reelmaster 2300–D/2600–D Page 3 – 11 Engine
Cleaning the Radiator and Screen
To prevent the engine from overheating, the radiator
screen, radiator, and oil cooler must be kept clean.
Check these components daily. If necessary, clean any
debris off these parts. Clean these components more
frequently in dusty dirty conditions.
1. Remove radiator screen (1).
2. Remove four cap screws and nuts that hold the
plastic cover to the radiator assembly. Remove plastic
cover from the radiator assembly.
3. Loosen both quick release knobs on the front end
of the radiator assembly. Now the oil cooler (3) can be
removed from the radiator for cleaning.
CAUTION
Use eye protection such as goggles
when using compressed air.
4. Working from fan side of radiator (2), either spray
the radiator with a hose or blow with compressed air.
5. Thoroughly clean oil cooler (3). Clean off any other
debris that may have collected around components.
6. Reinstall the oil cooler (3). Tighten both quick re-
lease knobs on the front end of the radiator assembly.
7. Reinstall plastic cover onto the radiator assembly.
Reinstall four cap screws and nuts that hold the plastic
cover to the radiator assembly. Tighten fasteners
8. Clean radiator screen (1) and reinstall.
Figure 13
1. Radiator screen
2. Radiator
3. Oil cooler
1
2
3
Engine