Filter
Top Products
Reelmaster 2300–D/2600–DPage 7 – 26Cutting Units
Skid Kit Installation
1. Remove front roller from the cutting unit (see Roller
Removal and Installation).
2. Align skid slots with the angle bracket holes on the
cutting unit.
3. Secure skid to the cutting unit with both flange head
screws, flat washers, and lock nuts.
4. Adjust skid height as necessary by loosening lock
nuts and flange head screws, then retighten fasteners.
1. Skid
2. Angle bracket holes
3. Flange head screw
4. Flat washer
5. Lock nut
3
1
4
5
2
Figure 30