Filter
Top Products
Reelmaster 3100--D
DPA Cutting Units (Rev G)
Page 8 -- 4
Special Tools
Special tools for servicing Toro Commercial Products
are availablefrom your Toro Distributor.Some tools may
have been supplied with your machine or are available
as TORO parts.
Gauge Bar Assembly
Toro Part Number: 108--6715
Use gauge bar to verify height--of--cut adjustment.
Figure 2
Used for Height--of--
Cut adjustment
Bedknife Screw Tool
Toro Part Number: TOR510880
This screwdriver--type bit is made to fit Toro bedknife at-
taching screws. Use this bit with a torque wrench to se-
cure the bedknife to the bedbar.
IMPORTANT: To prevent damage t o the bedbar, DO
NOT use an air or manual impact wrench with this
tool.
Figure 3
Handle Assembly
Toro Part Number: 29--9100
For applying lapping compound to cutting units while
keeping hands a safe distance from the rotating reel.
Figure 4