Filter
Top Products
Rev. D
Reelmaster 3100−D Hydraulic System (Rev. C)
Page 4 − 77
Hydraulic Manifold
1. Hose clamp
2. Micro switch
3. Barb fitting
4. Flange head screw
5. Straight hydraulic fitting
6. Straight hydraulic fitting
7. 90
o
hydraulic fitting
8. 45
o
hydraulic fitting
9. Straight hydraulic fitting
10. Barb fitting
11. Hydraulic manifold
12. Hydraulic hose
13. Hydraulic hose
14. Hose clamp
15. Spacer
16. Philips pan head screw
17. O−ring
18. O−ring
19. O−ring
20. O−ring
21. Hydraulic tube
22. O−ring
23. Hose
24. Hydraulic hose
25. Hydraulic hose
26. Hydraulic hose
27. Hydraulic hose
28. Hydraulic hose
29. Hose
Figure 49
1
2
3
4
9
6
7
8
10
16
11
14
15
5
5
7
6
17
18
18
17
24
25
27
26
19
20
28 18 22
29
12
20
13
18
17
18
17
23
21
19
FRONT
RIGHT
Removal
NOTE: The ports on the manifold are marked for easy
identification of components. Example: R1 is the reel cir-
cuit relief valve and P1 is the gear pump connection port
(See Hydraulic Schematics to identify the function of the
hydraulic lines and cartridge valves at each port loca-
tion).
1. Remove hydraulic manifold from the machine using
Figure 49 as guide.
2. If hydraulic fittings are to be removed from manifold,
mark fitting orientation to allow correct assembly.
Installation
1. If hydraulic fittings were removed, install fittings to
manifold using marks made during the removal process
to properly orientate fittings.
2. Install hydraulic manifold to the frame using Figure
49 as guide.
Hydraulic
System