Filter
Top Products
Reelmaster 3100−D Hydraulic System (Rev. C)
Page 4 − 67
Removal
WARNING
Before jacking up the machine, review and follow
Jacking Instructions in Chapter 1 − Safety.
1. Remove tire and wheel rim, wheel hub, and brake
drum from the hydraulic motor. Remove brake assem-
bly, brake bracket, and wheel shield from the frame (see
Front Wheel and Brake Removal in Chapter 6 − Wheels,
Brakes, and Miscellaneous).
2. Remove wheel motor from frame using Figure 42 as
guide.
Installation
1. Install wheel motor to frame using Figure 42 as
guide.
2. Install wheel shield, brake bracket, and brake as-
sembly to the frame. Install brake drum, wheel hub, and
tire and wheel rim to the hydraulic motor (see Front
Wheel and Brake Installation in Chapter 6 − Wheels,
Brakes, and Miscellaneous).
Hydraulic
System