Filter
Top Products
Rev. D
Reelmaster 3100−D Page 5 − 29 Electrical Systems (Rev. C)
Check Operation of Interlock Switches
CAUTION
Do not disconnect safety switches. They are for
the operator’s protection. Check the operation of
the interlock switches daily for proper operation.
Replace any malfunctioning switches before op-
erating the machine.
Note: The machine is equipped with an interlock
switch on the parking brake. The engine will stop if the
traction pedal is depressed with the parking brake en-
gaged.
1. Make sure all bystanders are away from the area of
operation. Keep hands and feet away from cutting units.
2. With operator on the seat, the engine must not start
with either the reel switch engaged or the traction pedal
engaged. Correct problem if not operating properly.
3. With operator on the seat, the traction pedal in neu-
tral, the parking brake off, and the reel switch in the OFF
position, the engine should start. Lift off seat and slowly
depress traction pedal, the engine should stop in one to
three seconds. Correct problem if not operating proper-
ly.
4. With operator on the seat, the engine running, the
reel transport slide in mow, and the reel switch in the ON
position, lower cutting units. Reels should come on. Pull
back on the lift lever, the reels should stop when fully
raised. Correct problem if not operating properly.
Electrical
System