Filter
Top Products
Reelmaster 5010 Series Page 5 -- 3 Electrical System
Diagnostic Display
The Diagnostic Display (Fig. 4) is connected to the
wiring harness connector located inside the control arm
to verify correct electrical functions of the machine.
Electronic Control Module (ECM) inputs and outputs
can be checked using the Diagnostic D isplay.
Toro Part Number for Diagnostic Display: 85--4750
Toro Part Number for Overlay (English): 110--0666
NOTE: Diagnostic Display overlays are available in
several languages for your Reelmaster. R efer to your
Parts Catalog for overlay language options and part
numbers.
IMPORTANT: The Diagnostic Display must not be
left connected to the machine. It is not designed to
withstand the environment of the machine’s every
day use. When use of Diagnostic Display is com-
pleted, disconnect it from the machine and recon-
nect loopback connector to harness connector.
Machine will not operate without loopback connec-
torinstalledon harness.StoreDiagnosticDisplayin
a dry, secure, indoor location, not on machine.
Figure 4
Figure 5
OVERLAY
DIAGNOSTIC
DISPLAY
Battery Hydrometer
Use the Battery Hydrometer when measuring specific
gravity of battery electrolyte. Obtain this tool locally.
Figure 6
Electrical
System