Filter
Top Products
Reelmaster 5010 SeriesHydraulic System (Rev. C) Page 4 -- 90
Lift Control Manifold Service
1. Lift control manifold
2. Check valve (4 used)
3. Solenoid valve (SV3)
4. Solenoid coil
5. Solenoid coil spacer
6. Nut
7. Solenoid valve (SV2)
8. Solenoid coil
9. Nut
10. Solenoid relief valve (SVRV)
11. Solenoid valve (SV1)
12. Relief valve (R7)
13. O--ring
14. Pilot piston (4 used)
15. O--ring
16. Hex plug (4 used)
Figure 77
FRONT
RIGHT
4
3
1
2
9
10
11
8
5
6
7
12
4
5
6
6
13
14
15
16
(33 N--m)
25 ft--lb
(27 N--m)
20 ft--lb
(27 N--m)
20 ft--lb
(101 N--m)
75 ft--lb
(27 N--m)
20 ft--lb
(33 N--m)
25 ft--lb
48 to 60 in--lb
(5.4 to 6.7 N--m)
48 to 60 in--lb
(5.4 to 6.7 N--m)
48 to 60 in--lb
(5.4 to 6.7 N--m)
NOTE: Theportson theliftcontrol manifoldaremarked
for easy identification of components. Example: P4 is
the gear pump P4 connection port and SV2 is the loca-
tion for solenoid v alve SV2. (See Hydraulic Schematics
to identify the function of the hydraulic lines and car-
tridge valves at each port location).