Filter
Top Products
Greensmaster eFlex1800/2100Page 5 -- 12Chassis and Controls
4. Connect spring (item 11 in Figure 11) between trac-
tion lever assembly and operator presence control.
5. Connectwireharnessconnectorsto traction and reel
engage switches (Fig. 11).
6. Connect reel clutch cable to lever assembly (see
Reel Clutch Cable Replacement in this section). Check
cable operation and adjust as necessary.
7. Check adjustment of t raction and reel engage
switches (see Traction Switch and Reel Engage Switch
in the Adjustments section of Chapter 5 -- Electrical Sys-
tem). Adjust switches if necessary.
8. Install console cover to handle.
9. Connectthe battery pack(see Battery Pack Connec-
tion in this section).
1. Transport lever
2. Reel shaft lever
3. Clearance location
4. Shifter bracket
5. Screw and nut
Figure 13
1
2
3
5
5
4