Filter
Top Products
Performance Verification
4-6
AWG510 & AWG520 Service Manual
Figure 4-2: Calibration result message box
c. Confirm that no failures are found: Verify that no failures are found and
reported in the message box. If the calibration displays Fail as the result,
consult a qualified service technician for further assistance.
3. Return to regular service: Push the OK side button and then any bottom or
menu button (other than the UTILITY) to exit the diag screen.
NOTE. When the instrument is powered off while the calibrations is executed, the
calibration data in the memory may be loss.