Removal and Installation Procedures
AWG510 & AWG520 Service Manual
6-47
5. Remove the Hard disk and Flash disk:
a. Using a screwdriver with a size Phillips #2 tip, remove tha two screws
securing the hard disk and flash disk bracket to the frame on the the right
side of the CPU Unit. See Figure 6–22.
b. Remove the screw on the left side of the bracket.
c. Grasp the bracket and slide it out.
d. Using a screwdriver with a size Phillips #2 tip, remove the three screws
securing the hard disk to the bracket. See Figure 6–23.
e. Remove the four screws securing the flash disk to the bracket.
Flash disk
Hard disk
Figure 6-23: Hard disk and flash disk removal