Filter
Top Products
Operating Information
AWG510 & AWG520 Service Manual
2-15
Note that the current unit is always kept when you just use the ENTER after
entering digits. For example, suppose that the Clock is currently set to 100.0
MS/s. When you press 5, 0 and ENTER buttons in this order, the Clock will be
set to 50.0 MS/s. To set to 500 kS/s, press 0, ., 5 and ENTER buttons, or 5, 0, 0,
SHIFT, and 8 buttons in this order.
Text Input
When you need to assign a name to a waveform file or equation, or a IP address
to the instrument, the instrument displays the text dialog boxes, shown in
Figure 2–7. The text field is where you enter or change an existing character
string. The character palette is where you select alphanumeric characters to insert
into the text field. You can also select equation or file names from the name list
to insert into the text field.
Character palette
Text field
Name list
Text field
Character palette
Text field
Underscore
character
Figure 2-7: Three type of Input text dialog boxes