68 Keypads
HX2 Reference Guide E-EQ-HX2RG-B
The Triple Tap Keypad
Requires file activation to setup the Triple Tap keypad for daily use.
Setup requires the My Device / Windows / Triple_Tap.reg file be tapped and the HX2
warmbooted. Warmboot the HX2 by tapping Start | Run and, using the Soft Input Panel (SIP),
type WARMBOOT. Tap OK.
Features
• The modifier keys are the Green, Orange, Blue, Shift and Control (CTRL) keys.
• Modifier keys are sticky keys. Any modifier key pressed after itself toggles the specific
modifier key off.
• Alpha keys are accessed by several taps: the blue modifier key and one to four taps of a
number key. Capital keys also require a Shift key tap.
• The orange Alpha LED has no function on this keypad and is off.
• The default timeout for any Alpha key is 0.15 second.
• Any key press exits volume control mode. Any key press exits backlight control mode.
• F1 through F10 function keys are available using the keypad. Function keys F11 through
F24 require multiple keypresses.
• Keys can be mapped by the user to generate any key code defined by Windows CE.
• Use Start | Settings | Control Panel | Keypad | KeyMap tab to change the Diamond 1 and
Diamond 2 key keypress defaults.
Figure 2-6 Triple Tap Keypad
The alphabet characters wrap for keys 2 – 9, for example:
• Blue + 2 produces a lower case a
• Blue + 22 produces a lower case b
• Blue + 222 produces a lower case c
• Blue + 2222 produces the number 2
See Appendix A – Key Maps for instruction on the specific keypresses to access all keypad
functions.
