Summit Client Configuration 209
E-EQ-HX2RG-B HX2 Reference Guide
or
Figure 5-24 PEAP/GTC Credentials
Note: The date must be properly set on the device to authenticate a certificate.
If using the Windows certificate store:
• Tap the Use MS store checkbox. The default is to use the Full Trusted Store.
• To select an individual certificate, click on the Browse [ . . .] button.
• Uncheck the Use full trusted store checkbox.
• Select the desired certificate and tap Select. You are returned to the Credentials screen.
If using the Certs Path option:
• Leave the Use MS store box unchecked.
• Enter the certificate filename in the CA Cert textbox.
Tap OK then tap Commit.
For information on generating a Root CA certificate, please see Root CA Certificate later in this
chapter.
Perform a Warm Boot (or Suspend/Resume) function to connect using the new profile
configuration.
The device should be authenticating the server certificate and using PEAP/GTC for the user
authentication.
See Also: Sign-On vs. Stored Credentials earlier in this chapter if the username and password are
left blank during setup.
