186 Summit Client Configuration
HX2 Reference Guide E-EQ-HX2RG-B
Config / Profile Parameters
Parameter Default Explanation
Config or
Edit Profile
Default A string of 1 to 32 alphanumeric characters, establishes the
name of the Config or Profile.
Options are Default or ThirdPartyConfig.
SSID Blank A string of up to 32 alphanumeric characters. Establishes the
Service Set Identifier (SSID) of the WLAN to which the client
connects.
Client Name Blank A string of up to 16 characters. The client name is assigned to
the network card and the device using the network card. The
client name may be passed to networking wireless devices, e.g.
Access Points.
Power Save Fast Power save mode is On.
Options are: Constantly Awake Mode (CAM) power save off,
Maximum (power saving mode) and Fast (power saving
mode).
Tx Power Maximum Maximum setting regulates Tx power to the Max power setting
for the current regulatory domain.
Options are: Maximum, 50mW, 30mW, 10mW or 1mW.
Depending on the version of the SCU, the options for Tx Power
are between Maximum and 1mW.
Bit Rate Auto Setting the rate to Auto will allow the Access Point to
automatically negotiate the bit rate with the client device.
Options are: Auto, 1 Mbit, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or
54 Mbit.
Radio Mode BG
Optimized
or
BG Rates
Full
Specify 802.11g and/or 802.11b when communicating with the
Access Point.
Options are: B rates only, BG Rates full, G rates only, BG
optimized.
Note: Default value may vary depending on installed SCU
driver version.
Auth Type Open 802.11 authentication type used when associating with the
Access Point.
Options are: Open, LEAP, or Shared key.
