Summit Client Configuration 191
E-EQ-HX2RG-B HX2 Reference Guide
Global / Global Settings Parameters
Custom Parameter Option
LXE does not support the parameter Custom option. The parameter value is displayed as
“Custom” when the operating system registry has been edited to set the Summit parameter to a
value that is not available from the parameter’s drop down list. Selecting Custom from the drop
down list has no effect. Selecting any other value from the drop down list will overwrite the
“custom” value in the registry.
Parameter Default Function ( * Not available in all versions )
RX Diversity On-start on Main How to handle antenna diversity when receiving
packets from the Access Point.
Options are: Main Only (use the main antenna only),
Aux Only (use the auxiliary antenna only), On-start on
Main (on startup, use the main antenna), or On-start on
Aux (on startup, use the auxiliary antenna).
TX Diversity On How to handle antenna diversity when transmitting
packets to the Access Point.
Options are: Main only (use the main antenna only),
Aux only (use the auxiliary antenna only), or On (use
diversity or both antennas).
Preamble *
Auto The type of network header, or preamble, for packets.
Options are: Auto, Short, or Long.
G Short Slot *
Auto 802.1x short slot timing mode.
Options are: Auto, On, or Off.
Note: The G Short Slot parameter has no effect on the
Summit client device. This option is always set to On
regardless of the parameter setting.
Roam Trigger -65 dBm If signal strength is less than this trigger value, the
client looks for a different Access Point with a stronger
signal.
Options are: -50 dBm, -55, -60, -65, -70, -75, -80, -85,
-90 dBm or Custom.
Roam Delta 10 dBm The amount by which a different Access Point signal
strength must exceed the current Access Point signal
strength before roaming to the different Access Point is
attempted.
Options are: 5 dBm, 10, 15, 20, 25, 30, 35 dBm or
Custom.
Roam Period 10 sec The amount of time, after association or a roam scan
with no roam, that the radio collects Received Signal
Strength Indication (RSSI) scan data before a roaming
decision is made.
Options are: 5 sec, 10, 15, 20, 25, 30, 35, 40, 45, 50,
55, 60 seconds or Custom.
