A SERVICE OF

logo

Open as PDF
next previous
40 Data Entry
HX2 Reference Guide E-EQ-HX2RG-B
Scan Status LED
Figure 1-34 Scan Status LED
The Scan Status LED (oval shaped LED on the top of the ring scanner) turns red when the laser
beam is on. Following a barcode scan and read the Scan Status LED turns green for two seconds
and the HX2 may beep, indicating a successful scan. If the scan was unsuccessful, the Scan Status
LED turns off and a different beep sequence may be heard.
The ring scanner engine and Scan Status LED automatically turn off after a successful or
unsuccessful read. The ring scanner is ready to scan again after the Scan button is released, or
after the Scan Status LED turns off following a successful scan.
Voice Data
Data is entered into the HX2 by speaking into the headset’s microphone (or the internal
microphone located below the Up Arrow) when prompted.