44 Setting Timers
HX2 Reference Guide E-EQ-HX2RG-B
AC Power Scheme
Use this option when the mobile device will be running on external power (e.g. docked in a
powered cradle).
Switch state to User Idle Default is After 2 minute
Switch state to System Idle Default is After 2 minutes
Switch state to Suspend Default is After 5 minutes
The mode timers are cumulative. The System Idle timer begins the countdown after the User Idle
timer has expired and the Suspend timer begins the countdown after the System Idle timer has
expired. When the User Idle timer is set to “Never”, the power scheme timers never place the
device in User Idle, System Idle or Suspend modes (even when the device is idle).
Because of the cumulative effect, and using the Battery Power Scheme Defaults listed above:
• The backlight turns off after 3 seconds of no activity,
• The display turns off after 18 seconds of no activity (15seconds + 3seconds),
• And the device enters Suspend after 5 minutes and 18 seconds of no activity.
See Chapter 3 – System Configuration for more information.
