16 Components
HX2 Reference Guide E-EQ-HX2RG-B
Li-Ion Battery
Main battery charging is handled exclusively by the HX2 Multi-Charger/analyzer and the battery
charger integrated into a powered HX2 cradle.
The Standard battery is much thinner than the Extended battery.
Each battery will fit in the battery sleeve on an armband, hip flip and the voice case.
Note: Do not allow water or chemical cleaning agents of any kind to come in contact with the
battery charging contacts or the battery cable connector; they may be damaged. If
necessary, clean them with a soft-bristle, dry brush or compressed air.
Standard Battery
Extended Battery
Figure 1-15 HX2 Standard and HX2 Extended Battery
Battery Charge/Connect
Terminals
HX2 Battery Cable
Connector
Note: When placing the tethered battery in an armband or hip flip battery sleeve, ensure the
Battery Charge/Connect terminals are protected from accidental damage by keeping
them covered by the sleeve fabric at all times.
Note: New batteries must be charged prior to use. The backup battery is continually recharged
by the tethered battery.
