A SERVICE OF

logo

Open as PDF
next previous
210 Summit Client Configuration
HX2 Reference Guide E-EQ-HX2RG-B
EAP-TLS Authentication
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Admin Login password and tap OK.
Tap the Config or Profile tab.
Figure 5-25 Configure a Summit Profile with EAP-TLS
Enter the SSID of the Access Point assigned to this profile.
Set Auth Type to Open.
Set EAP Type to EAP-TLS.
Set Encryption to WPA TKIP.
To use Stored Credentials, tap the Credentials button.
No entries are necessary for Sign-On Credentials as the user will be prompted for the User name
and Password when connecting to the network. If the username and password are left blank
during setup, see Sign-On vs. Stored Credentials earlier in this chapter.