180 Summit Client Configuration
HX2 Reference Guide E-EQ-HX2RG-B
Summit Client Configuration
Summit Client Utility Icon
Note: Terminology used on your screen displays may be different than those shown in the
figures in this chapter. Contact your LXE representative for Summit driver updates as
they become available.
Start the Summit Client configuration by tapping the Summit Client Utility icon on the desktop.
You can also start the Summit Client utility by tapping Start | Programs | Summit | SCU.
Important: After adding a new profile or changing parameters of an existing profile, tap Start |
Suspend. When the device Resumes, saved changes are applied.
Summit Client Utility
Access: Start | Programs | Summit | SCU or SCU Icon on Desktop or
SCU Icon in Taskbar
or
Figure 5-1 Summit Client Utility (SCU)
The Main tab provides information, the Admin Login and active config (profile) selection.
Profile specific parameters are found on the Config or Profile tab. The parameters on this tab can
be set to unique values for each profile.
The Status tab contains information on the current connection.
The Diags tab provides utilities to troubleshoot the client (network device).
Global parameters are found on the Global Settings or Global tab. The values for these
parameters apply to all profiles.
Note: A password is required before making changes to Summit client profile parameters. A
password is not required to switch from one profile to another.
Help
Help is available by clicking the ? button in the title bar on most SCU screens.
SCU Help may also be accessed by selecting Start | Help and tapping the Summit Client Utility
link. The SCU does not have to be open to view the help information using this option.
