100 Settings | Control Panel Options
HX2 Reference Guide E-EQ-HX2RG-B
Settings
Figure 3-12 Bluetooth Settings Panel
Turn Off Bluetooth Button
Tap the button to toggle Bluetooth hardware On or Off. When Off, the Bluetooth LED is turned
off. The default value is Bluetooth On.
Options
Option Default Information
Report when
connection lost
Enabled There may be an audio or visual signal when a connection
between a paired, active device is lost. A visual signal may
be a dialog box placed on the display. Tap the X button or
OK button to close the dialog box. When disabled, lost
connections are invisible to the user.
Report when
connected
Disabled When enabled, there may be an audio or visual signal when
a connection between a paired, active device is re-
connected. A visual signal may be a dialog box placed on
the display. Tap the X button or OK button to close the
dialog box.
Report failure to
reconnect
Enabled The default time delay is 30 minutes. This value cannot be
changed by the user. There may be an audio or visual signal
when a connection between a paired, active device is re-
connected. A visual signal may be a dialog box placed on
the display. Tap the X button or OK button to close the
dialog box. When disabled, failure to reconnect is invisible
to the user.
Possible reasons for failure to reconnect: Timeout expired
without reconnecting; attempted to pair with a device that is
currently paired with another device; attempted to pair with
a known device that moved out of range or was turned off;
attempted to pair with a known device but the reason why
reconnect failed is unknown.
Computer is
connectable
Enabled Disable this option to inhibit HX2 connection with all
nearby Bluetooth devices.
