204 Summit Client Configuration
HX2 Reference Guide E-EQ-HX2RG-B
PEAP/MSCHAP Authentication
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Administrator password and tap OK.
Tap the Config or Profile tab.
or
Figure 5-17 Configure a Summit Profile for PEAP/MSCHAP
Enter the SSID of the Access Point assigned to this profile.
Set Auth Type to Open.
Set EAP Type to PEAP-MSCHAP.
Set Encryption to Auto WEP (without WPA). To configure PEAP-MSCHAP for WPA set
Encryption to WPA TKIP.
To use Stored Credentials, tap the Credentials button.
No entries are necessary for Sign-On Credentials as the user will be prompted for the User name
and Password when connecting to the network.
Enter the Username or Domain\Username in the Credentials popup text entry box, if desired.
Enter the Password, if desired. Leave the CA Certificate Filename blank for now. Tap OK. Tap
Commit.
