132 ActiveSync / Get Connected Process
HX2 Reference Guide E-EQ-HX2RG-B
Initial Install
Initial installation / relationship must be established using a USB cable connection between the
HX2 and the desktop/laptop (PC). Once a relationship has been established, tap
| Help |
ActiveSync for help.
Install ActiveSync on Desktop/Laptop
Go to the Microsoft Windows website ActiveSync Download | Install file location:
www.microsoft.com/downloads
and type
ActiveSync in the Keywords text box. This process should locate the latest version of
ActiveSync.
Install ActiveSync on the PC before using ActiveSync to connect the PC to the mobile device.
Follow the instructions in the ActiveSync Wizard.
Check that
| Programs | Communication | ActiveSync | Tools | Options has the correct
connection selected. Refer to USB Connection.
When installation of ActiveSync is complete on your PC, the ActiveSync Setup Wizard on the PC
begins and it begins searching for a connected device.
Because ActiveSync is already installed on your mobile device, your first synchronization process
begins automatically when you finish setting up your PC in the ActiveSync wizard and, using the
HX2 ActiveSync cable, connect your mobile device to the PC.
Figure 3-45 Connect ActiveSync Cable to HX2 Cradle Connector
Insert the HX2 cable end into the cradle connector on the bottom of the HX2 until a click is heard.
Insert the USB-A end in a USB port on the desktop/laptop computer.
Note: The ActiveSync cable for the HX2 does not appear to fit tightly with the cradle connector
(see Figure). This is normal.
