20 Components
HX2 Reference Guide E-EQ-HX2RG-B
System Status LEDS
Figure 1-21 System Status LEDs
LED Color Indicates . . .
Green - Blinking
Display turned off when timer expires. This will help to
conserve battery power. Tap the screen or press any key
(except the Power button) to turn the display on again. The
HX2 is not in Suspend Mode.
Red - Steady
Main Battery Low. If the main battery is not replaced with
a fully charged battery before the main battery fails, the
HX2 is turned Off.
Red - Blinking
Main Battery Power Fail
1
System
Status
Off
Suspend Mode.
Blue - Blinking Slowly
Bluetooth is active but not connected to a device.
Blue – Blinking Medium
Bluetooth is paired and connected to a device.
Blue - Blinking Fast
Bluetooth is discovering nearby Bluetooth devices.
2
Off
Bluetooth hardware has been turned off or does not exist in
the HX2.
3
Alpha Amber - Steady
Alpha mode enabled
When multiple system status conditions are present, the most urgent condition is indicated. The
conditions listed above are in increasing order of urgency by LED type.
Note: The Dual Alpha keypad and the Triple Tap keypad do not use the Alpha LED.
