A SERVICE OF

logo

46 Setting Timers
HX2 Reference Guide E-EQ-HX2RG-B
Adjusting the Display Backlight Timer
Select | Settings | Control Panel | Display | Backlight tab. Change the parameter values and
tap OK to save the changes.
Figure 1-39 Setting the Display Backlight Timer
The first option affects the display when the HX2 is running on battery power only. The second
option affects the display when the HX2 is running on external power (e.g. docked in a powered
cradle).
The default value for the battery power timer is 3 seconds.
The default value for the external power timer is 2 minutes. The display backlight will remain
on all the time when both checkboxes are blank.
The display backlight timer dims the backlight at the end of the specified time.
When the Keypad Backlight is On, it responds to the settings of the Display Backlight Timer. See
next segment titled Turning the Keypad Backlight On or Off.
See Chapter 3 – System Configuration for more information.
Adjusting the Display Brightness
The display brightness is increased or decreased one step each time the adjust brightness key
sequence is pressed.
To adjust display brightness:
Alpha Mode 3 Tap keypad – Open the Keypad Control Panel | Keymap tab and map a key
to Brightness Up and Brightness Down. Tap OK. Tap the mapped keys to increase or
decrease display brightness.
Dual Alpha Keypad and the Triple Tap Keypad -- Light Blue+Diamond 1+Up Arrow
and Light Blue+Diamond 1+Down Arrow keys.
Until the display brightness is satisfactory.