130 SD Flash Cards, CAB Files and Programs
HX2 Reference Guide E-EQ-HX2RG-B
SD Flash Cards, CAB Files and Programs
The Flash card, located inside the HX2, is intended to protect the user from losing the LXE
drivers and configuration information in the event of a cold boot. Also, on any boot, the contents
of any registered CAB files are automatically unpacked. The flash card cannot be
removed/exchanged by the user.
Access Files on the Flash Card
Tap the My Device icon on the Desktop then tap the System icon.
Files
A flash card is used for permanent storage of the LXE driver and utility files. It is also used for
registry content back up. The flash card cannot be removed/exchanged by the user.
CAB files, when executed, are not deleted.
SUMMIT.CAB Summit Client files needed for radio operation.
APPLOCK.CAB AppLock program. See Chapter 6 - AppLock.
The following CAB files are optional and may or may not be present:
LXE_HX2_ENABLER.CAB Wavelink Avalanche Enabler.
RFTERM.CAB RFTerm terminal emulation application.
JAVA.CAB Java application.
BLUETOOTH.CAB Bluetooth Client files needed for pairing operation.
Note: APPLOCK.CAB can be removed if not used. The Wavelink Avalanche Enabler CAB file
should not be executed if the HX2 will not be managed using Wavelink Avalanche
Manager. See section titled Wavelink Avalanche Enabler Configuration
later in this
chapter.
