LXE E-EQ-HX2RG-B Manual

A SERVICE OF

next previous

Summit Client Configuration 207

E-EQ-HX2RG-B HX2 Reference Guide

WPA PSK Authentication

Start the Summit Utility by tapping the Summit Client icon.

Tap the Admin Login button on the Main panel. Enter the Administrator password and tap OK.

Tap the Config or Profile tab.

or

Figure 5-21 Configure a Summit Profile with WPA PSK Encryption

Enter the SSID of the Access Point assigned to this profile.

Set Auth Type to Open.

Set EAP Type to None.

Set Encryption to WPA PSK.

Tap the WEP keys/PSK Keys button.

Figure 5-22 Summit PSK Entry Dialog

Enter the Passphrase in the PSK Entry popup text entry box. This value can be a 64 hex character

or an 8-63 byte ASCII value. Tap OK

Tap the Commit button to save the new profile configuration.

Perform a warm reset (or Suspend/Resume) to connect using the new profile configuration.