184 Summit Client Configuration
HX2 Reference Guide E-EQ-HX2RG-B
Config / Profile Tab
Note: Tap the Commit button to save changes before leaving this panel or the SCU. If the
panel is exited before tapping the Commit button, changes are not saved!
Factory Default Settings
Config / Profile Default
SSID Blank
Client Name Blank
Power Save Fast
Tx Power Maximum
Bit Rate Auto
Radio Mode BG Optimized
or
BG Rates Full
Auth Type Open
EAP type None
Encryption None
or
Figure 5-4 SCU – Config / ProfileTab
When logged in as an Admin (see Admin Login), use the Config / Profile tab to manage profiles.
When not logged in as an Admin, the parameters can be viewed, and cannot be changed. The
buttons on this tab are dimmed if the user is not logged in as Admin.
Buttons
Button Function
Commit Saves the profile settings made on this screen. Settings are saved in the profile.
Credentials Allows entry of a username and password, certificate names, and other
information required to authenticate with the access point. The information
required depends on the EAP type.
Delete Deletes the profile. The current active profile cannot be deleted and an error
message is displayed if a delete is attempted.
New Creates a new profile with the default settings (see Config/Profile Parameters)
and prompts for a unique name. If the name is not unique, an error message is
displayed and the new profile is not created.
Rename Assigns a new, unique name. If the new name is not unique, an error message is
displayed and the profile is not renamed.
