Summit Client Configuration 193
E-EQ-HX2RG-B HX2 Reference Guide
Parameter Default Function ( * Not available in all versions )
Certs Path System A valid directory path, of up to 64 characters, where
WPA Certificate Authority and User Certificates are
stored on the mobile device. LXE suggests ensuring
the Windows folder path currently exists before
assigning the path in this parameter. See sections titled
Root Certificates and User Certificates later in this
chapter for instructions on obtaining CA and User
Certificates. This value is masked when the Admin is
logged out.
Options are: none.
For example, when the valid certificate is stored as My
Computer/System/MYCERTIFICATE.CER, enter
System in the Certs Path text box as the Windows
folder path.
CCX or CCX
Features
Off Use of Cisco Compatible Extensions (CCX) radio
management and Access Point specified maximum
transmit power features.
Options are: On, Off
WMM Off Use of Wi-Fi Multimedia extensions.
Options are: On, Off
Tray Icon *
On Determines if the Summit icon is displayed in the
System tray.
Options are: On, Off
Aggressive
Scan *
On When set to On and the current connection to an AP
weakens, the radio aggressively scans for available
APs.
Aggressive scanning works with standard scanning (set
through Roam Trigger, Roam Delta and Roam Period).
Aggressive scanning should be set to On unless there is
significant co-channel interference due to overlapping
APs on the same channel.
Options are: On, Off
Auth Timeout *
8 seconds Specifies the number of seconds the Summit software
waits for an EAP authentication request to succeed or
fail.
If the authentication credentials are stored in the active
profile and the authentication times out, the association
fails. No error message or prompting for corrected
credentials is displayed.
If the authentication credentials are not stored in the
active profile and the authentication times out, the user
is again prompted to enter the credentials.
Options are: An integer from 3 to 60.
Note: Tap the Commit button to save changes. If this panel is closed before tapping the
Commit button, changes are not saved!
