102 Settings | Control Panel Options
HX2 Reference Guide E-EQ-HX2RG-B
Pairing and Auto-Reconnect
The HX2 Bluetooth
®
module can establish relationships with new devices after the end-user taps
the Discover button. It can auto-reconnect to devices previously known but which have gone out
of and then returned within range. Pairing supports SPP devices only.
Up to two Bluetooth devices can be connected to the HX2 at a time; LXE supports one scanner
and one printer (see Accessories).
Taskbar Icon Legend
Bluetooth
®
module is connected to one or more of the targeted
Bluetooth device(s).
HX2 is not connected to any Bluetooth device.
HX2 is ready to connect with any Bluetooth device.
HX2 is out of range of all paired Bluetooth device(s). Connection is
inactive.
Note: Configuration elements are persistent and stored in the registry.
Setup the Bluetooth
®
module to establish how the user is notified by easy pairing and auto-
reconnect events.
AppLock, if installed, does not stop the end-user from using the Bluetooth application, nor does it
stop other Bluetooth-enabled devices from pairing with the HX2 while AppLock is in control. See
Chapter 6 – AppLock for more information.
Certificates
Access: | Settings | Control Panel | Certificates
Manage digital certificates used for secure client communication. Lists the Stored certificates
trusted by the HX2 user. These values may change based on the type of network security resident
in the client, access point or the host system.
Figure 3-14 Control Panel – Stored Certificates
Tap the Import button to import a digital certificate file. Tap the View button to view a
highlighted digital certificate. Tap the Remove button to remove highlighted certificate files. Tap
the ? button and follow the instructions in the Help file when working with trusted authorities and
digital certificates.
See Also: Chapter 5 - Wireless Network Configuration for instruction.
