Assembly 21
E-EQ-HX2RG-B HX2 Reference Guide
Assembly
Connecting the Battery and Ring Scanner
Note: The unit cannot function unless a battery is securely tethered. Be sure to place the mobile
device in Suspend mode before disconnecting a battery, or all unsaved data may be lost.
The battery and ring scanner should not be exchanged or replaced in a dirty, harsh or hazardous
environment. When the tethers are disconnected, any dust or moisture that adheres to the tether
connector can potentially cause damage upon cable re-connection.
Follow the numbers in the following tables to connect the battery and ring scanner to the HX2.
Note: Before connecting cables to the back, make sure the battery sleeve on the armband is
uppermost or the following left/right directions won’t work.
Figure 1-22 Tether the Battery and Ring Scanner – Left / Right
When you want to switch connectors from left to right, or vice versa, first gently press downward
on the Retaining Clip, then pinch and pull the cable connector (not the cable!) straight up and
away from the HX2. Do not use a metal object, or extreme force, to remove the cable connector
from the HX2.
Re-connect cables and reassemble the HX2 body-worn components.
Ring Scanner on the Left Hand
1 Ring Scanner Tether cable channel
2 Retaining Clip for Ring Scanner Tether Connector
3 Ring Scanner cable connector
4 Battery Cable connector
5 Retaining Clip for Tethered Battery Connector
6 Tethered Battery Cable channel
Ring Scanner on the Right Hand
1 Tethered Battery Cable channel
2 Retaining Clip for Tethered Battery Connector
3 Battery Cable connector
4 Ring Scanner cable connector
5 Retaining Clip for Ring Scanner Tether Connector
6 Ring Scanner Tether Cable channel
