8 Getting Started
HX2 Reference Guide E-EQ-HX2RG-B
Wearable Device Assembly
Armband
Figure 1-1 HX2 Armband, Left Arm Orientation, Ring Scanner, Audio
Prerequisite: Optional add-on devices are available.
• Fasten the armband to your left or right arm before continuing with these directions. See
Connecting the Battery and Ring Scanner.
• Slide the battery into the battery sleeve on the armband.
• Snap all tethered devices to the connectors at the back of the HX2. See Connecting the Battery
and Ring Scanner and Connecting the Audio Cable and a Headset.
• Snap the HX2 into the armband mounting bracket. See Mounting Bracket Clips.
• Attach the battery cable to the battery.
• Connect audio devices (see Connecting the Audio Cable and a Headset), if included.
• Slip the ring scanner (if included) over one of your fingers, making sure your thumb or trigger
finger can easily reach the Scan button. See Ring Scanner Strap.
• Adjust the HX2 arm assembly for comfort. Occasionally check all connectors for stability.
The wearable computer is ready for use.
