26 Tapping the Power Key
HX2 Reference Guide E-EQ-HX2RG-B
Cold Boot
Tap | Run and type coldboot. Tap the OK button. Factory default settings overwrite all
previously saved user settings.
Calibrating the touchscreen will need to be performed when the cold boot process is complete.
• Wireless Client configuration will need to be completed by the System Administrator.
• Required mappable keys will need to be configured. For example, there is no , Control,
Shift, Alt or Del key (or their equivalent) available using the HX2 default keypad setting.
• Optional software
2 and LXE application 3 parameters will need to be set up by the
System Administrator.
Important -- Because of the extreme nature of the Cold Boot, LXE recommends that the
Cold Boot process be used only as an emergency procedure and Warm Boot or
Suspend/Resume be used whenever necessary.
Note: Refer to the section titled Power Modes
for more information relating to the power states
of the HX2.
Note:
The HX2 reloads the operating system upon every warm boot or cold boot. Anything not
saved or preserved to the registry is lost.
In warm boot, the OS and the CAB files are reloaded from the internal SD card and the
preserved registry is also reloaded.
During cold boot, the system behavior is identical to warm boot with the addition that the
registry is erased, forcing the HX2 to reboot with factory defaults. The registry is recreated
when 20 minutes of uptime elapses or upon the first save or suspend function. It is also
recreated every 10 registry changes and at every warm boot.
Checking Battery Status
Tap the | Settings | Control Panel | Battery icon. Main battery level, backup battery level,
status and other details are displayed.
2
Optional software setup may include Summit Wireless Client communication setup, Voice-Enabled
software connection to wireless link, Wavelink Avalanche management of the HX2 file structure at startup,
and Bluetooth device-pairing and re-connect.
3
LXE application software setup may include Summit Wireless Client communication setup, RFTerm
terminal emulation configuration, and AppLock application-locking configuration.
