Settings | Control Panel Options 97
E-EQ-HX2RG-B HX2 Reference Guide
Bluetooth
Access: | Settings | Control Panel | Bluetooth
Discover and manage pairing with nearby Bluetooth devices. Only LXE printers or scanners are
recognized and displayed in the Bluetooth panel. All other Bluetooth devices are ignored. Your
Bluetooth panel setups may be different than those shown on the following pages.
Factory Default Settings
Discovered Devices None
Settings
Turn Off Bluetooth Enabled
Report when connection lost Enabled
Report when connected Disabled
Report failure to reconnect Enabled
Computer is connectable Enabled
Computer is discoverable Disabled
Prompt if devices request to pair Disabled
Continuous search Disabled
Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are
discovered, pair, connect and disconnect. There may be audible or visual signals as paired devices
re-connect with the HX2.
• The HX2 default Bluetooth setting is On.
• The HX2 cannot be discovered by other Bluetooth devices when the Computer is
discoverable option is disabled (unchecked) on the Settings panel.
• Other Bluetooth devices cannot be discovered if they have been set up to be Non-
Discoverable or Invisible.
• The HX2 can pair with one Bluetooth scanner and one Bluetooth printer.
• Paired scanners and printers connections must be deleted before a different scanner or
printer can be paired with the HX2.
• The Bluetooth remote device should be as close as possible, and in direct line of sight, with
the HX2 during the pairing process.
Assumption: The System Administrator has Discovered and Paired targeted Bluetooth
devices for the HX2.
Figure 3-7 Control Panel - Bluetooth
Tap the Discover button to locate all discoverable nearby Bluetooth devices. The Discovery
process also queries for the unique identifier for each device discovered.
