Wavelink Avalanche Enabler Configuration 157
E-EQ-HX2RG-B HX2 Reference Guide
Use Manual Settings When enabled, the Enabler will ignore any network or wireless
settings coming from the Avalanche Management Console and use
only the network settings on the mobile device.
Properties Icon
Selecting the Properties icon displays the Manual Settings Properties
dialog applet. From here, the user can configure Network, DNS and
Wireless parameters using the displays shown below:
Note: A reboot may be required after enabling or disabling these options.
Network DNS Wireless
For device-specific descriptions of these Enabler parameters, refer to Chapter 5 – Wireless Network Configuration.
LXE does not recommend enabling Manage Wireless Settings.
Figure 3-57 Manual Settings Properties Panels
When you download a profile that is configured to manage network and wireless settings, the
Enabler will not apply the manage network and wireless settings to the adapter unless the global
Manage wireless settings and Manage network settings options are enabled on the Adapters
panel (see Figure titled Avalanche Enabler Adapters Options – Network). Until these options are
enabled, the network and wireless settings are controlled by the third-party software associated
with these settings.
