138 Utilities
HX2 Reference Guide E-EQ-HX2RG-B
slots are off on powerup, to prevent the Unidentified PCMCIA Slot dialog from appearing. Once
the drivers are loaded, the slot can be turned on. The value in the PCMCIA field is a DWORD,
representing the number of seconds to wait after installing the CAB file, but before activating the
slot (a latency to allow the thread loading the driver to finish installation). The default value of 0
means the slot is not powered on. The default values for the default radio drivers (listed below) is
1, meaning one second elapses between the CAB file loading and the slot powering up.
Note that the auto-launch process can also launch batch files (*.BAT), executable files (*.EXE),
registry setting files (*.REG), or sound files (*.WAV). The mechanism is the same as listed
above, but the appropriate CE application is called, depending on file type.
Registry information is already in the default image for the following
5
:
;; ------- autoexec batch file – for users convenience
[HKEY_LOCAL_MACHINE\SOFTWARE\LXE\Persist\AUTOEXEC]
“FileName”=”\\System\\Autoexec.bat”
“Installed”=dword:0
“FileCheck”=”ALWAYSEXEC”
“Order”=dword:50
;; The file name “ALWAYSEXEC” or “dummy” does not really matter as long as there is
;; no file of that name in the directory. You can use any name that you want for this entry
;; as long as it is a non existent file name. The purpose of this value is that if someone
;; wants to only execute this file one time then you would replace the value of FileCheck
;; with the name of a file that would exist the next time a warm boot occurs.
;; special function – makes Launch copy system folders from ATA drive
;; we put it in here so that we control when it happens (esp. for Applock)
[HKEY_LOCAL_MACHINE\SOFTWARE\LXE\Persist\COPYFOLDERS]
“FileName”=”COPYFOLDERS”
“Installed”=dword:0
“FileCheck”=””
“Order”=dword:10
;; ------- Summit radio support
[HKEY_LOCAL_MACHINE\SOFTWARE\LXE\Persist\Summit Radio]
“FileName”=”\\System\\SUMMIT.CAB”
“Installed”=dword:0
“FileCheck”=”\\WINDOWS\\SDCCF10G.DLL”
“Order”=dword:2
“PCMCIA”=dword:1
;; ------- RFTerm support
[HKEY_LOCAL_MACHINE\SOFTWARE\LXE\Persist\LXE TE]
“FileName”=”\\System\\RFTERM.CAB”
“Installed”=dword:0
“FileCheck”=”\\WINDOWS\\LXE\\RFTERM.EXE”
“Order”=dword:11
5
CAB files for options not purchased are not loaded e.g. JAVA or RFID. If a CAB file is missing, please contact
your LXE Representative.
