232 Multi-Application Configuration
HX2 Reference Guide E-EQ-HX2RG-B
Multi-Application Configuration
Access: | Settings | Control Panel | Administration icon
Note: AppLock cannot support multiple windows of some applications. Attempting to open
multiple windows of RFTerm or Pocket Word will cause AppLock to switch to
Administration mode.
Application Panel
Access: | Settings | Control Panel | Administration icon
Figure 6-4 Application Panel – Multi-Application
Use the Application tab options to select the applications to launch when the device boots up in
End-user Mode.
If no application is specified when the Administrator Control Panel is closed, the mobile device
reboots into Administrator mode. If a password has been set, but an application has not been
specified, the user will be prompted for the password before entering administration mode. The
password prompt remains on the display until a valid password is entered.
Option Explanation
Filename
Default is blank. Move the cursor to the Filename text box and either type the
application path or tap the Browse button (the … button). The standard
Windows CE Browse dialog is displayed. After selecting the application from
the Browse dialog, tap OK.
Title
Default is blank. Enter the Title to be associated with the application. The
assumption is that multiple copies of the same application may need unique
titles in order to differentiate them in the application switcher panel.
Arguments
Default is blank. Enter the command line parameters for the application in the
Arguments text box.
Order
Default is 1. Enter the Order in which the application is to be loaded or
presented to the end-user. Applications are launched in lowest to highest
number order.
