A SERVICE OF

logo

Open as PDF
next previous
198 Summit Client Configuration
HX2 Reference Guide E-EQ-HX2RG-B
No Security
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Administrator password and tap OK.
Tap the Config or Profile tab.
or
Figure 5-11 Configure a Summit Profile with No Security
Enter the SSID of the Access Point assigned to this profile.
Set Auth Type to Open.
Set EAP Type to None.
Set Encryption to None.
Tap the Commit button to save the new profile configuration.
Perform a warm reset function to connect using the new profile configuration.
Note: LXE recommends performing a Suspend/Resume function each time the Commit button is
tapped.