242 Error Messages
HX2 Reference Guide E-EQ-HX2RG-B
Error Messages
Any messages whose first word is an ‘ing’ word is output prior to the action described in the
message. For example, “Switching to admin-hotkey press” is logged after the administrator has
pressed the hotkey but prior to starting the switch process.
For all operations that can result in an error, an Error level message is displayed when a failure
occurs. These messages contain the word “failure”. These messages have a partner Extended level
message that is logged which contains the word “OK” if the action completed successfully rather
than with an error.
For processing level messages, “Enter…” is logged at the beginning of the function specified in
the message and “Exit…” is logged at the end (just before the return) of the function specified in
the message.
Message Explanation and/or corrective action Level
Error reading hotkey The hotkey is read but not required by AppLock. LOG_EX
Error reading hotkey; using default A hotkey is required. If there is a failure reading the
hotkey, the internal factory default is used.
LOG_ERROR
App Command Line= <Command
line>
Command line of the application being locked LOG_PROCESSING
App= <Application name> Name of the application being locked LOG_PROCESSING
dwProcessID= <#> Device ID of the application being locked LOG_EX
Encrypt exported key len <#> Size of encrypt export key LOG_EX
Encrypt password length= <#> The length of the encrypted password. LOG_EX
Encrypted data len <#> Length of the encrypted password LOG_EX
hProcess= <#> Handle of the application being locked LOG_EX
Key pressed = <#> A key has been pressed and trapped by the hotkey
processing.
LOG_EX
***************** The status information is being saved to a file and the
file has been opened successfully.
LOG_EX
Address of keyboard hook
procedure failure
AppLock found the kbdhook.dll, but was unable to get
the address of the initialization procedure. For some
reason the dll is corrupted. Look in the \Windows
directory for kbdhook.dll. If it exists, delete it. Also
delete applock.exe from the \Windows directory and
reboot the unit. Deleting applock.exe in this manner
triggers the AppLock system to reload.
LOG_ERROR
Address of keyboard hook
procedure OK
AppLock successfully retrieved the address of the
keyboard filter initialization procedure.
LOG_EX
Alt pressed The Alt key has been pressed and trapped by the
HotKey processing.
LOG_EX
