200 Summit Client Configuration
HX2 Reference Guide E-EQ-HX2RG-B
LEAP w/o WPA Authentication
If the Cisco/CCX certified Access Point (AP) is configured for open authentication, set the Auth
Type client parameter to Open.
If the AP is configured for network EAP only, set the Auth Type client parameter to LEAP.
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Admin Login password and tap OK.
Tap the Config or Profile tab.
or
Figure 5-13 Configure a Summit Profile for LEAP w/o WPA
Enter the SSID of the Access Point assigned to this profile.
Set Auth Type to Open.
Set EAP Type to LEAP.
Set Encryption to Auto WEP.
To use Stored Credentials, tap the Credentials button.
No entries are necessary for Sign-On Credentials as the user will be prompted for the User name
and Password when connecting to the network.
