Yamaha TG500 Portable Generator User Manual


 
2. Selecting And Playing Voices
17
CARD VOICE MEMORY
CARD memory voice numbers begin with the letter “C”. The CARD
memory is one or two optional Yamaha MCD64 Memory Card (or pre-pro-
grammed voice cards) plugged into the TG500 DATA 1 and/or DATA 2 slot.
Memory cards are convenient for external storage and transportation of voices
you or others create. You can also store sets of related voices on different
memory cards. An MCD64 Memory Card holds four banks of 64 voices each
— a total of 256 voices per card. Each card is also divided into two banks,
each holding two voice banks of 64 voices each. The card bank to be accessed
(1 or 2) must be selected via the UTILITY mode “4:Card” function “4-1:Bank”
parameter (page 233). Thus, 128 of the 256 voices stored on a card can be
accessed at a time.
DATA 1 CARD VOICE MEMORY
C
I
.............................
Card voice bank 1 (00 … 63).
C
II
............................
Card voice bank 2 (00 … 63).
DATA 2 CARD VOICE MEMORY
C
III
...........................
Card voice bank 3 (00 … 63).
C
IV
..........................
Card voice bank 4 (00 … 63).
A properly formatted Yamaha MCD64 memory card (or an
appropriate pre-programmed voice card) must be inserted in
the DATA 1 and/or DATA 2 slot before the card memory can be
selected.
Select a Voice & Play
1 Select the Voice Play Mode
Press the [PLAY MODE] key as many times as necessary to select the
voice play mode. “VCE PLAY” will appear on the top line of the LCD panel.
The information displayed on the bottom display line tells you
about the current effect mode and what effects are assigned to
the TG500’s two effect processors. See the “Effects” section
beginning on page 251 for more details.
IMPORTANT
DETAIL