Open as PDF
VOICE EDIT MODE / VOICE
When you’re satsfied with a new voice you’ve created in the voice edit mode, use
the store function described below to store the new voice to an internal or card
When you’ve finished editing, return to the voice play mode (press the
[PLAY MODE] key), and before selecting a different voice press the [STORE/COPY]
key. You can now use the [MEMORY], [-1/NO] and [+1/YES] keys to select the
memory location to which your new voice is to be stored.
Once the store location has been specified, press [ENTER] to begin the store
procedure. The following confirmation display will appear:
Press [+1/YES] to confirm that you want to go ahead with the store operation
(which will erase all previous data in the specified memory location), or press
[-1/NO] to cancel.
When the voice data has been stored, “Completed!” will appear briefly on the
display, then the display will return to the voice play mode.